30X 1080P Thermal Vehicle PTZ camera




  • high die-cast aluminum casing,waterproof grade IP66; selection of high-quality infrared light, the irradiation distance is up to 300 meters;
  • 128 preset positions, 6 cruising tracks, and 3 self-learning paths;
  • Pan rotation speed 0~100°/s, tilt rotation speed 0~80°/s
  • 360°continuously rotation, the tilt angle up to 180°, auto flip
  • Camera position coordination and magnified zoom display function;it could be widely used for car surveillance at night and in bad environments, (especially suitable for monitoring in the dark districts without light);the power voltage input for car surveillance: DC12V. built-in surge protection and lightning protection, to effectively prevent 4000v Instantaneous current;
  • Detection distance: 300M.




Model QH-PTZ124H
  Parameter Description
Thermal imaging camera characteristics Detector type Uncooled infrared focal plane sensor
Effective Pixels 640×480
Induction method Microbolometer
Pixel spacing 17um
Response band 8~14um
Thermal sensitivity NETD 50mK /F1.0,300K
Fixed focus heat dissipation lens 50 mm (8 / 15 /25 / 35mm optional)
Aperture F value 1
Recognition distance (human body) 370M
Recognition distance (vehicle) 1130M
Focusing method Manual/electric
Field of view 7.0o×5.6o
False color image mode Black hot/white hot/rainbow/iron red, etc. (12 types in total)
Image detail enhancement Multi-level continuously adjustable, edge sharpening
Mirror function Horizontal/Vertical/Horizontal+Vertical
Noise reduction function Have
Non-uniformity correction Electronic correction without stop
OSD display Have
Output image resolution D1/ CIF
Output frame rate 30fps
Parameter of visiable camera 30X 2 million 1/2.8″ CMOS ICR day and night network HD movement
sensor type 1/2.8″ Progressive Scan CMOS
Scanning system line-by-line scan
signal system PAL/NSTC
Video output Network encoding output
Resolution 50HZ:25fps(1920X1080) 60HZ:30fps(1920 X1080)
50HZ:25fps(1280X960) 60HZ:30fps(1280X960)
50HZ:25fps(1280X720) 60HZ:30fps(1280X720)
Mini Low lux Color:0.05Lux @ (F1.6,AGC ON)
B&W:0.01Lux @ (F1.6,AGC ON)
Signal to noise ratio >52dB
focal length 4.5-135mm, 30X optical zoom
Aperture value F1.6-F4.4
Horizontal field of view 65.1-2.34 degrees (wide angle-telephoto)
Close-up 10mm-1500mm (wide angle-telephoto)
Zoom speed About 3 seconds (optical, wide-angle-telephoto)
Day and night conversion mode ICR filter type
Parameter setup
Video compression H.265/H.264/MJPEG
Compressed output bit rate 32kbps-12Mbps
Audio compression G.722.1、G.711-a law、G.711-u law、MP2L2、G.726、AAC
Focus mode Auto/Manual/One-time focusing
Exposure mode Automatic exposure/aperture priority/shutter priority/manual exposure
Day and night mode Auto/color/black and white/timing/alarm input trigger
Electronic shutter 1/1 second ~ 1/30,000 second
White balance Auto1/Auto2/Indoor/Outdoor/Manual/Sodium lamp/Fluorescent lamp
BLC Off/up/down/left/right/center/auto
Gain 16 levels adjustable
Dead pixel compensation stand by
Wide dynamic Off/on
Digital noise reduction 3D
Lens initialization Built-in
Image quality adjustment Brightness, contrast, sharpness, saturation can be adjusted
Digital zoom 12
Network function
Video compression H.265 /H.264
Compressed output bit rate 32kbps-12Mbps
Audio compression G.722.1、G.711-a law、G.711-u law、MP2L2、G.726、AAC、PCM
Storage function Support MicroSD storage
Image settings Movement function can be adjusted through the client or IE browser
Smart alarm Motion detection, occlusion alarm, memory full, memory error, audio anomaly detection, cross-border detection, area intrusion detection
Interface Protocol ONVIF、PSIA、CGI、ISAPI
Dual stream Support
Heartbeat function Support
Security Mechanism Password protection, multi-user access control
External Interface 36pin FFC (including network port, RS485, RS232, CVBS, SDHC, Alarm In/Out, Line In/Out, power supply)
External communication RS232 interface, HIKVISION protocol, RS485 interface, Pelco protocol
Variable speed head features Rotating speed Pan:0.1°~80°/s,Tilt:0. 1°~60°/s
Rotation angle Pan:0°~360° continuous, Tilt:+90°~-90°
Preset position accuracy ±0.1°
  Number of preset positions Up to 256
Line scan support
cruise support
Pattern scanning support
Guard position support
Control protocol Pelco-D
Baud rate 2400/4800/9600/19200bps
Communication Interface RS485
Electrical characteristics Input voltage The working voltage of the equipment is DC9~DC36V (AC24V optional)
Power consumption ≤50W
Operating temperature Temp: -20℃~+60℃ (heating device is optional for lower temperature)
humidity RH90% MAX(Non-condensing)
Protection level IP66
Installation method Vertical mounting/wall mounting (optional mounting bracket)
Physical properties weight 10Kg


More Details:





Download Latest Catalog


Send Enquiry Now

[forms ID=1]